Hardware & Engineering · for any sector

Vision hardware and engineering for your own vehicles and products.

RailEyes designs its own capture hardware, optics, firmware and edge software, and has run them on scheduled trains. The same capability is available to teams building their own vision systems.

RailEyes hardware: camera unit, edge main board, EdgeStream carrier board and PowerBridge power board.

What we offer

Edge capture units

Camera and edge capture hardware with visual capture, GPS, cellular connectivity, onboard storage and motion sensing, built and iterated on scheduled trains.

RailEdge Camera

Engineering for your vehicles (OEM / ODM)

Adapting capture hardware, optics, firmware and edge software to your vehicle, power supply, mounting and data constraints.

Discuss a project

Monocular depth and perception

Depth-aware visual context from a single calibrated camera, for workflows that need approximate sizes and distances without dedicated LiDAR.

Technology

Consulting

Feasibility, architecture, data governance and pilot scoping for teams evaluating vision AI on moving vehicles.

Start an enquiry

Hardware is supplied for evaluation and integration projects. Component ratings and documentation are provided per project; installation remains subject to the vehicle owner's acceptance.

Our own designs, available to you

Cameras and boards from our own devices, for other manufacturers and integrators.

We designed this hardware for our own edge devices, including the RailEyes units that run on scheduled trains. Manufacturers and system integrators can now use it in their own products. Documentation is shared per project.

Camera unit with an M12 lens mounted directly on the board.
Lens on the board
Camera unit with the lens and sensor on a flex cable above the interface board.
Lens on a flex cable

Camera units

Two versions of the same 4 MP MIPI CSI-2 camera. With the lens on the board for compact housings, or with the lens on a flex cable so the sensor can sit away from the electronics. For cameras mounted further away, both work with a GMSL or GMSL2 bridge over FAKRA coaxial cable.

Sensor
4 MP colour CMOS (OV4689), 2688 × 1520, 1/3-inch, 2 µm pixels
Frame rate
Up to 90 fps at full resolution, 120 fps at 1080p
Interface
MIPI CSI-2, 2 lanes
Long cable runs
Ready for a GMSL or GMSL2 serializer bridge with FAKRA connectors, for cameras mounted away from the main board
Lens
M12 mount; lens and field of view chosen per project
Ask about the camera units
Edge main board, top side, with heat sink, connectors and microSD card.
Top
Edge main board, bottom side, with two module slots.
Bottom

Edge main board

The processing board for vehicle-mounted vision: video, motion and position processed on board, with cellular, Wi-Fi and optional V2X connectivity.

Processor
Six ARM cores: 2 × Cortex-A72 up to 1.8 GHz and 4 × Cortex-A53 up to 1.4 GHz
Camera interface
2-lane MIPI CSI-2, on one physical connector
Long-distance cameras
Compatible with a GMSL or GMSL2 deserializer bridge over FAKRA coaxial cable, for cameras placed across a vehicle
Motion
9-axis inertial measurement unit
Positioning
10 Hz GPS/GLONASS receiver
Cellular
2G on board. Optional 4G LTE Cat 4: up to 150 Mbps down and 50 Mbps up, LTE-FDD B1/B3/B5/B7/B8/B20 and LTE-TDD B38/B40/B41, with 3G and 2G fallback
Wi-Fi and Bluetooth
Dual-band Wi-Fi 802.11a/b/g/n (2.4 and 5 GHz); Bluetooth 4.1 (classic and BLE)
V2X
Optional C-ITS module (ETSI ITS-G5)
Storage
microSD card
Ask about the edge main board
PowerBridge board: a compact power interface board with a round connector.

PowerBridge

The power interface we designed to run our capture units reliably from vehicle supplies, in daily service.

Ask about PowerBridge
EdgeStream carrier board with a compute module and a cellular module.

EdgeStream

The carrier board at the heart of our edge capture units, built for continuous capture and processing on moving vehicles.

Ask about EdgeStream

Questions

Hardware: frequently asked questions.

Which interface do the camera units use?

MIPI CSI-2 with 2 lanes. The 4 MP sensor delivers up to 90 fps at full resolution and 120 fps at 1080p, and takes M12 lenses chosen for the field of view you need.

Can the cameras be mounted far from the main board?

Yes. The camera units and the edge main board work with a GMSL or GMSL2 serializer and deserializer bridge over FAKRA coaxial cable, the usual approach for cameras placed across a vehicle.

Can the hardware be adapted to our vehicle or product?

Yes. We adapt optics, mounting, power supply, firmware and edge software to your vehicle and data constraints, as an OEM or ODM project.

Is documentation available?

Yes. Documentation and component ratings are shared per project, together with evaluation hardware.